Table of Contents
Advertisement
Fold the backrest (see chapter 5.2 "Closing the backrest").
Take hold of the chair with one hand on the front frame and the
other hand on the backrest handle so as to balance the
weight of the wheelchair and make lifting it easier.
Load the wheelchair into the car. Then load the rear wheels
(see fig.23).
Fig. 23
The reduced size of the folded chair allows it to be loaded into
the boot of the car (fig. 24) or between the front and rear seats
(see fig. 25).
Fig.24
Loading the wheelchair without assistance
(see fig. 26-27-28)
The following actions have been designed for people with good
control of their upper body, arms and hands as well as sufficient
strength to perform the movements in complete safety.
Open the door on the side where you will get into the car from
(eg. the driver's door), after that move the chair as close as
possible to the seat.
Engage the brakes and get into the car (see chapter 2.1
"Movements: getting into and out of the wheelchair") (see
fig.26).
Once you are inside the car, release the wheelchair brakes
and pull out the rear wheels (see chapter 5.5 "Quick release
rear wheels").
Fig.25
JOKER ENERGY
19
Advertisement
Table of Contents
