Table of Contents
Advertisement
Fig.13
If the axles are not correctly placed and
fastened they may work loose during normal
use
and
could
overbalancing and possibly causing injury.
2.8
Backrest locking system
After opening the backrest (see chapter 5.3 "Opening the
backrest") always check carefully that the bolt "A" is properly
inserted in the hole of the fixing plate "S" on both sides.
An audible click indicates that the backrest has been successfully
and securely opened (see fig.14).
Check the correct functioning
of the quick release axle
without any person sitting on
the chair.
Disengage the brakes
With
one
hand
on
backrest tube, lift the chair a
few centimetres on the side
where the rear wheel will be
removed.
Take hold of the wheel hub
with
your
fingers
through one or two spokes
and pull and push hard (as
indicated by the arrow) in
order to ensure that the
wheel is properly fastened
result
in
the
wheelchair
the
laced
2.9 Footplate
Fig. 15
JOKER ENERGY
Fig.14
Fig. 16
14
Advertisement
Table of Contents
