Taking A Measurement - UPRtek PG100N User Manual

2.1 Preparing Before Use
Set up date and time
Set up date and time before taking any measurement.
1
Press lower right
arrow icon to enter
the next page.
3
Press"Date"and"Time"for
its settings.
09
2
Click " Option "
icon.
4 Once date is set, press Yes
to exit to setup option
page.
5 Once time is set, press Yes
to exit to setup option
page.

2.2 Taking a Measurement

Precautions on optical sensor installation
Make sure optical sensor latch is well connected to host.
Dark calibration
1 Once this product is powered on the power key lights in
green and the screen prompts with message for dark
calibration .
2 The "Do you want to do dark calibration?" dialog box
displays, click Yes to proceed.
3 Click OK once the cover is well replaced.
Once message "Dark calibration finish" prompts, click
OK and the main menu displays.
1. Press and hold power key for 1 second to power on this product.
Press and hold power key for 3 seconds to power it off.
2.
Please run dark calibration after each power on of this product.
3.
3
4
10