Quick Start Guide - Extech Instruments GX900 User Manual

True rms industrial multimeter

Hide thumbs Also See for GX900:

Table of Contents

QUICK START GUIDE

Step One: Ensure that batteries are installed and are fresh

Step Two: Carefully read the Safety section of this Instruction Manual

Step Three: Check the Table of Contents to find the section of this Instruction

Manual related to the desired test

Step Four: Connect the test leads to the meter and to the device under test as

described in this Instruction Manual's section related to the test in question

Step Five: Safely perform the test as described in this Instruction Manual

Step Six: Read the measurement value on the LCD display

Step Seven: Carefully disconnected the meter's test leads from the circuit or

device under test

Step Eight: Read the section of this Instruction Manual entitled Features and

Functions to learn more about the multitude of meter uses and features

Step Nine: Disconnect the test leads from the circuit under test and from the

meter and switch OFF the meter before storing.

Extech Instruments

GX900-EU-EN V1.6 4/14

Table of Contents

Need help?

Do you have a question about the GX900 and is the answer not in the manual?