Setting The Date And Time; Automatic Power Off - Extech Instruments GX900 User Manual

SETTING THE DATE AND TIME
The meter's internal clock is used for time‐stamping and for general informational
purposes. To change the date and time, as well as the display format, press the F4
key (SETUP) and then follow the steps below:
1. Position the menu selector next to the item labeled DISPLAY and press OK.
2. Position the menu selector next to the item DATE/TIME and press the OK key.
3. Position the menu selector next to either the SET DATE or the SET TIME item
and the press the OK key.
4. Using the left and right arrows position the cursor on the date or time
element to adjust it.
5. Use the up and down arrows to change the selected date or time values.
6. Press the F1 key (OK) to complete and confirm the actions.
AUTOMATIC POWER OFF
1. Open the Setup menu by pressing the F4 Key (SETUP).
2. Position the menu selector next to INSTRUMENT and press OK.
3. Position the menu selector next to SETTINGS and press OK.
4. Position the menu selector next to the item labeled POWER OFF and press OK.
5. To set the Auto Power OFF time interval, use the up and down arrows to select
the time in minutes (05 to 60).
6. Set the time to zero (00) to disable the Auto Power OFF feature.
7. Press the F1 key (OK) to confirm the selection.
8. Press the F4 key (CANCEL) to return to the normal operating mode without
saving the edit.
35
Extech Instruments
GX900-EU-EN V1.6 4/14