Trap Generation; Mib Loading; Hp Openview Network Node Manager 6.41 And Earlier - Avaya IP Office Phone Installation Manual

Technical Data

Trap Generation

RFC1215 Generic SNMP Traps:
Trap type
warmStart
coldStart
linkDown
linkUp
authenticationFailure
IPO-MIB:
Trap type
ipoGenLKSCommsFailureEvent
ipoGenLKSCommsOperationalEven
t
IPO-PHONES-MIB:
Trap type
ipoPhonesChangeEvent

MIB Loading

In order to SNMP manage an IP Office system, that is browse its MIBs and fully interpret
the traps it sends out, the MIBs supported by IP Office must be loaded and compiled for
use with your Network Management System. The supported standard and proprietary
MIBs together with the MIB files relied upon for definitions are provided on the IP Office
Admin CD off the directory snmp_mibs. Detailed below are details of how to install the
appropriate MIBs with a number of Network Management Systems.

HP OpenView Network Node Manager 6.41 and earlier:

MIBs are installed in Network Node Manager by selecting Options and Load/Unload MIBs:
SNMP from the menu and then using the Load... option and browsing for MIB files to load
and compile. The following MIBs must be installed in the order listed to fully SNMP
manage an IP Office system:
MIB file
RFC2737-ENTITY-MIB
AVAYAGEN-MIB.mib
IPO-PROD-MIB.mib
IPO-MIB.mib
INET-ADDRESS-MIB.mib
RFC2213-INTEGRATED-
SERVICES-MIB
DIFFSERV-DSCP-TC.mib
DIFFSERV-MIB-HPOV.mib
IPO-PHONES-MIB.mib
IP Office Installation Manual
40DHB0002USCL – Issue 9 (28th October 2003)
Generated
Upon soft reboot.
Upon unexpected reboot such as a power outage.
Upon transition of an interface (PPP or Frame-Relay) from the
up operational state into the down operational state.
Upon transition of an interface (PPP or Frame-Relay) from the
down operational state into the up operational state.
Upon attempted SNMP request with mismatched community for
the type of operation.
Generated
Upon loss of communication with a configured License
Key Server.
Upon re-gaining communication with a configured License
Key Server.
Generated
Upon change of a DT, DS or IP extension phone type after
normal start-up. No traps are issued for POT extensions as the
presence or absence of such phones cannot be established
hence the ipoPhonesType for such extensions is always
potPhone.
Source
snmp_mibs\standard on OpenView install CD
snmp_mibs\IPOffice on IP Office Admin CD
snmp_mibs\IPOffice on IP Office Admin CD
snmp_mibs\IPOffice on IP Office Admin CD
snmp_mibs\Standard on IP Office Admin CD
snmp_mibs\standard on OpenView install CD
snmp_mibs\Standard on IP Office Admin CD
snmp_mibs\Standard on IP Office Admin CD
snmp_mibs\IPOffice on IP Office Admin CD
Technical Specifications - Page 83
Technical Data - Page 83
Technical Specifications