Introduction; 1.1 International Electrical Symbols - AEMC MR6292 User Manual

These safety warnings are provided to ensure the safety of personnel
and proper operation of the instrument.
• Read this instruction manual completely and follow all the safety infor-
mation before attempting to use or service this instrument.
• Use caution on any circuit: Potentially high voltages and currents may
be present and may pose a shock hazard.
• Read the safety specifications section before using the Model MR6292.
Never exceed the maximum working voltage ratings given.
• Safety is the responsibility of the operator!
• Never open the back of the instrument while connected to any circuit
or input.
• ALWAYS connect the Model MR6292 to the Micro-Ohmmeter Model
6292 instrument before clamping the probe onto the sample under
test.
• Always inspect the probe and lead prior to use. Replace any defective
parts immediately.
• NEVER use the Model MR6292 on electrical conductors rated above
600V.

1.1 International Electrical Symbols

This symbol signifies that the instrument is protected by double or rein-
forced insulation. Use only specified replacement parts when servicing
the instrument.
This symbol on the instrument indicates a WARNING and that the
operator must refer to the user manual for instructions before operat-
ing the instrument. In this manual, the symbol preceding instructions
indicates that if the instructions are not followed, bodily injury, installa-
tion/sample and product damage may result.
Risk of electric shock. The voltage at the parts marked with this symbol
may be dangerous.
This is a type A current sensor. This symbol signifies that application
around and removal from HAZARDOUS LIVE conductors is permitted.
2
0.561.8187
CHAPTER 1

INTRODUCTION

Warning
AC/DC Current Probe Model MR6292
www. .com
information@itm.