Table of Contents
Advertisement
IP412 Office Platform
IP412 Office - Front View
Port connections
• LAN Ports
The segmented dual independent auto-negotiating 10/100 BaseT Ethernet ports are used for PC
and server connectivity. They can also be used to connect to the optional IP400 WAN3 Expansion
Module (see page 30) and IP telephones.
Information relating to incoming and outgoing telephone calls can be forwarded to PC based
applications via these ports. These segmented Ethernet ports support separate IP and MAC
addresses and hence a Firewall break may be implemented. They also provide access to the
router functionality/configuration of the IP412 Office platform for both data and Voice over IP
(VoIP) calls. (Where IP telephony is required, a suitable switch, i.e. an Avaya Cajun P130, must
be used.)
Cables
IP412 Office DT PRI 30 E1 & DS PRI 24 T1 are supplied with one red ISDN cable. IP412 Office DT
PRI60 E1 & PRI48 T1 are supplied with two red ISDN cables. For Port Pinouts and Cables, refer to
pages 51 and 55 respectively.
IP Office Installation Manual
40DHB0002USCL – Issue 7 (09/25/2002)
Expansion Ports 1-12
Green Status LEDS
Unit Status LED
Red = Alive but not initiated
Green = Running OK
IP412 Office - Front View - Page 23
WAN Port
Green Status LED
Trunk Ports 1-8
Green Status LEDS
IP412 Office Platform - Page 23
LAN Ports 1-2
IP412 Office - Front View
Advertisement
Table of Contents
