Restarting The Terminal; Restarting The System - Honeywell EDA50K-0 User Manual

Restarting the Terminal

If the terminal or an application is locked or doesn't respond when pressing the power key,
you need to restart the terminal.
When restarting, the terminal will use the current configuration saved in the flash memory.
Try the following ways to restart the terminal:
•
•
•

Restarting the system

When an application is not responding, you may need to restart the terminal to resolve the
issue.
1.
2.
User Guide for ScanPal50 Series Terminal
Restarting the system: Restarts the terminal's operating system
Restarting hardware: If there is no response after pressing the power button, hold it
down for 13 seconds to force restart of the device
Restore default settings: Clears all data in the terminal including all applications,
data and files except built-in files or data in the movable storage device
Save the file and close open applications.
Press and hold "Power Key" until the following interface displayed:
Chapter 8: Management and Maintenance
77