Restarting The Handheld Computer; Restarting The System - Honeywell ScanPal Series User Manual

Restarting the Handheld Computer

Restarting the system

64
If the Handheld Computer or an application is locked or doesn't respond
when pressing the power key, you need to restart the Handheld
Computer.
When restarting, the Handheld Computer will use the current
configuration saved in the flash memory. Try the following ways to
restart the Handheld Computer:
• Restarting the system: Restarts the Handheld Computer‟s
operating system
•
Restarting hardware: If there is no response after pressing the
power button, hold it down for 13 seconds to force restart of the
device
•
Restore default settings: Clears all data in the Handheld
Computer including all applications, data and files except built-in
files or data in the movable storage device
When an application is not responding, you may need to restart the
Handheld Computer to resolve the issue.
1. Save the file and close the application that has been opened
already.
2. Press and hold „Power Key‟ till the following interface displays:
User Guide for ScanPal EDA60K-0 Handheld Computer