Honeywell EDA50K-0 User Manual page 19

Power indicator on the upper left corner of the terminal shows the battery charging status. It
can also be used as system message indicator. For detailed setting methods, please refer to
http://developer.android.com/guide/topics/ui/notifiers/notifications.html.
Default power indicator description
User Guide for ScanPal50 Series Terminal
Chapter 1: Product Features of ScanPal50 Series EDA50K-X Terminal
Icon Status
Battery power is 100% full
Battery power is 50% full
Battery power is too low. Replacing the battery right now.
The terminal has been connected to external power supply for charging.
Battery failure occurs. Please replace the battery. If the failure still exists,
please contact Honeywell technical support.
Connect to
Indicator status
power supply
No Flashing amber (Orange)
No No light
Stable amber
Yes
(Orange)
Yes Flashing green
Yes Stable green
Yes/no Flashing red
Description
Battery power is less than 15% full
Battery power is higher than 15% full
Battery power is between 0% to 60%
full
Battery power is between 60% to 95%
full
Battery power is higher than 95% full
Battery failure
13