Restarting The Terminal; Resetting The Terminal - Honeywell Dolphin 75e User Manual

Hide thumbs Also See for Dolphin 75e:
Table of Contents

Advertisement

4. Insert the new battery and install the battery door.
5. Apply pressure to the edges of the battery door to ensure the door is properly closed. Engage the door lock.
6. Press the Power button
Important: All battery and connector doors must be present, undamaged, and properly closed to maintain the environmental
rating of the terminal.

Restarting the Terminal

You may need to restart the terminal to correct conditions where an application stops responding to the system or the terminal
seems to be locked up.
• Press and hold the Power button
down toward the bottom of the screen. Press the Power button and to turn the terminal back on.
To perform a restart if the touch panel display is unresponsive:
• Press and hold the Volume Down
restarts.

Resetting the Terminal

If the terminal completely stops responding, you may need to perform a Factory Reset (Clean Boot). Because resetting the
terminal can result in data loss, use this method only if all other recovery methods have failed.
When a reset is performed, all personal content is erased (e.g., emails, pictures, contacts) and all factory default settings are
restored on the terminal. The reset discards any account information you added, including your Microsoft account information.
Only installed Microsoft over-the-air (OTA) updates persist after a reset is performed.
Caution: A Factory Reset (Clean Boot) erases the memory in the terminal, including all applications and data files,
with the exception of those found in the Flash File Store or any removable storage. Any custom
provisioning must be reimplemented after a Factory Reset.
To perform a Factory Reset (Clean Boot):
1. Touch Settings
on the Apps list screen.
2. Touch about, and then select reset your phone.
3. Touch Yes, and then Yes again to confirm restoring the factory settings.
4. Once the terminal resets, the set up Welcome screen appears. For more information, see
Terminal
on page
1-4.
.
. When the message, "slide down to power off" appears, release the button and swipe
and Power
buttons simultaneously for 10-15 seconds. The terminal automatically
Power On and Set Up the
1 - 13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents