Honeywell EDA50K-0 User Manual page 72

Chapter 7: Configuring Terminal
3.
4.
If the network is secure, a form will pop up asking you to fill in the necessary information
(for example: certificate name, password or other credentials). To connect to a secure
network, enter the required information, and then tap Connect.
•
•
Configuring Wi-Fi network proxy servers
If users need to connect to network resources through a proxy server, they need to configure
a proxy server for each Wi-Fi network added. By default, none of the Wi-Fi networks added
by users has done proxy server settings.
66
To quickly connect to a network via WLAN Protected Access (WPS), tap
search the network outside of the list, slide to the end of the list and tap Add network
and enter the network name.
Tap on a network name to view its details.
To leave the network that has been connected, tap Forget. For example, users can
choose to forget a network that they won't use again.
To close the network information screen, tap Cancel.
User Guide for ScanPal50 Series Terminal
. To