Ipv4 - Xerox ColorQube 8580 System Administrator Manual

Hide thumbs Also See for ColorQube 8580:
Table of Contents

Advertisement

IPv4

This section includes:
Configuring IPv4 With BOOTP/DHCP .......................................................................................................................... 25
Configuring IPv4 Without BOOTP/DHCP ................................................................................................................... 25
You can configure IPv4 with or without BOOTP/DHCP. To enable the printer to acquire TCP/IP
information automatically, configure IPv4 with BOOTP/DHCP. To enter TCP/IP information manually,
configure IPv4 without BOOTP/DHCP. Without BOOTP/DHCP, the printer does not issue BOOTP or DHCP
requests on startup.
Before you assign an IP address, ensure that no other device on the network is using the address. If
another device is using the same IP address, the printer goes offline until the conflict is resolved.
Notes:
To use BOOTP, set up a reservation for the printer on the BOOTP server.
If you change the BOOTP/DHCP setting, the connection to the printer can be lost.
Configuring IPv4 With BOOTP/DHCP
In CentreWare Internet Services, click Properties > Protocols.
1.
2.
Click TCP/IP (v4).
3.
To enable TCP/IP v4, select the check box.
4.
For Auto IP Enable, select an option.
On: This option assigns the IP address automatically.
Off: This option allows you to configure the IP address manually. This setting is recommended
for enterprise networks.
For BOOTP/DHCP, select On.
5.
6.
Click Save Changes.
Configuring IPv4 Without BOOTP/DHCP
1.
In CentreWare Internet Services, click Properties > Protocols.
Click TCP/IP (v4).
2.
3.
To enable TCP/IP v4, select the check box.
4.
For Auto IP Enable, select an option.
On: This option assigns the IP address automatically.
Off: This option allows you to configure the IP address manually. This setting is recommended
for enterprise networks.
5.
For BOOTP/DHCP, select Off.
Click Save Changes.
6.
7.
Click Close to return to the previous page.
To view the updated settings, select Properties > TCP/IP.
8.
®
Xerox
ColorQube 8580/8880 Color Printer
System Administrator Guide
Network Connectivity
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Colorqube 8880

Table of Contents