Configuration Overview - Xerox ColorQube 8580 System Administrator Manual

Introduction

Configuration Overview

When you configure the printer for the first time, complete the following tasks. For details, see
Setup on page 11, on page 13.
1. Ensure that your printer is connected physically to your network.
2. Confirm that your network recognizes your printer. By default, the printer receives an IP address
from a DHCP server over a TCP/IP network. If you have a different type of network or want to assign
a static IP address, see
3. To view the printer IPv4 or IPv6 address, print a Configuration Page. For details, see
Page on page 13
4. To access most configuration settings for the printer, use CentreWare Internet Services.
Note: You can access most configuration settings in CentreWare Internet Services on the Properties
tab.
5. Create a host name for the printer. For details, see
6. Configure network protocols. For details, see
7. Configure security features and set administrative accounts. For details, see
page 49.
8. Configure job accounting. For details, see
®
8 Xerox ColorQube 8580/8880 Color Printer
System Administrator Guide
IP on page 23.
Network Connectivity
Job Accounting
DNS/WINS on page 27.
on page 21.
on page 53.
Initial
Configuration
Security on page 47, on