6. Refer to Figure 4-6. Move the computer lockout slide
computer, this inhibits all other computers in the cabinet from being extended. Fully
extend the computer on the slide rails.
Figure 4-6 D Class Computer Removal Diagram
7. From under the tray, remove the two tray mounting screws
computer to the tray. Be sure the three back mounting screws
8. Lift the D Class computer
Chapter 4
off the tray and shelf assembly.
(4)
Removal and Replacement Procedures
Removal and Replacement Procedures
away from the front of the
(2)
, that hold the front of the
(3)
are removed.
(1)
4-13