Figure 2-4. Removing the Shipping Block
8. Position the ramp so that the block of wood under the ramp locks into the edge of the
pallet with the strip of wood forming a lip. This holds the ramp in place while the
cabinet is moved across the pallet and down the ramp. See Figure 2-4.
9. Raise the cabinet leveling feet to their highest position.
WARNING
Make sure that the leveling feet on the cabinet are raised before you
roll the cabinet down the ramp. If the leveling feet are not raised,
they can catch on the ramp and cause the cabinet to tip over.
10.Carefully roll the cabinet (3) down the ramp, as shown in Figure 2-4.
Chapter 2
Unpacking and Installation
Unpacking the Cabinet Assembly
2-5