Retrieve Gps Status - Symmetricom TimeSource 3100 User Manual

Retrieve GPS Status

This command displays the position of the GPS receiver, UTC time, and status
information for each of the GPS satellites in view. The command format is:
RTRV-GPS-STAT:[<tid>]:GPS:<ctag>;
Response Format:
<sid> <date> <time>
M <ctag> COMPLD
"GPS:LAT=x,LONG=x,<alt>,<utc>"
"GPS:SAT-x,USE=X,CNO=x,ELEV=x,AZ=x,LOCK=x"
...
/*LINK:<link>,CMD:<command>*/
;
Parameter
LAT=a a = dd.mm.fffN
a = dd.mm.fffS
LONG=a a = ddd.mm.fffE
a = ddd.mm.ffW
ALT=a a = mm.mmm
UTC=a a = hh-mm-ss
SAT=a a = 1 to 25
USE=a a = Y
a = N
CNO=a a = nn
ELEV=a a = dd
AZ=a a = ddd
LOCK=a a = 1 to 2500
097-72020-01 Revision K – December 2005
Value
Current latitude north in degrees, minutes, and
decimal-fractions of a minute
Current latitude south in degrees, minutes, and
decimal-fractions of a minute
Current longitude east in degrees, minutes, and
decimal-fractions of a minute
Current longitude west in degrees, minutes, and
decimal-fractions of a minute
Altitude in meters to the thousandth of a meter,
referenced to mean sea level
Universal Coordinated Time (UTC), where hh = hours (00
to 23), mm = minutes (00 to 59), and ss = seconds (00 to
59)
Satellite identification number
Satellite in use
Satellite not in use
Satellite carrier-to-noise ratio
Satellite elevation in degrees
Satellite azimuth in degrees
Seconds since the receiver locked to the satellite carrier
Chapter 4 TL1 Reference
Description
TimeSource User's Guide 143
Commands