Tasks/Commands; Commands For Tasks - Symmetricom TimeSource 3100 User Manual

Chapter 4 TL1 Reference

Tasks/Commands

Tasks/Commands
To perform each task, use the command listed beside that task in
Table 4-2. Commands for Tasks
Log user onto system
Log user off of system
Copy software program or database
Delete equipment from the database
Delete a user from system
Change communication port parameters
Change the system date and time
Change equipment parameters
Enter equipment into the database and allow the
equipment to be used for monitoring
Enter a new user and configure the new user's user
name, password, and access level
Reset the alarm log
Reset to zero all performance monitoring
parameters associated with a given aid
Reset the system processor or GPS receiver
processor
Deactivate the audible office alarm
Display current system alarms
Display current alarms for specific equipment
Display current communication port parameter
settings
Display current system alarms and events
Display current alarms and events for specific
equipment
Display parameter settings of equipment
Display GPS status information
Display header information
100 TimeSource User's Guide
Task Command
Activate User
Cancel User
Copy Memory
Delete Equipment
Delete User Security
Edit Communication
Edit Date
Edit Equipment
Enter Equipment
Enter User Security
Initialize Log
Initialize Register
Initialize System
Operate Alarm Cutoff All
Retrieve Alarm All
Retrieve Alarm Equipment
Retrieve Communication
Retrieve Condition All
Retrieve Condition
Equipment
Retrieve Equipment
Retrieve GPS Status
Retrieve Header
097-72020-01 Revision K - December 2005
Table 4-2.
Page
102
103
104
106
107
108
111
113
122
124
125
126
127
128
129
130
131
134
135
136
143
144