Retrieve Equipment - Symmetricom TimeSource 3100 User Manual

Chapter 4 TL1 Reference
Commands

Retrieve Equipment

This command displays parameter settings for the specified equipment. The
command format is:
RTRV-EQPT:[<tid>]:<aid>:<ctag>;
Aid
ALL
TS3100
GPS
RO-x
SPAN-x
E1-a
OPT-a
Command Example:
RTRV-EQPT::TS3100:<ctag>;
Response Format:
<sid> <date> <time>
M <ctag> COMPLD
"<aid>::::<spec_block>"...
/*LINK:<link>,CMD:<command>*/
;
The parameters which may be displayed in the <spec_block> are listed below.
136 TimeSource User's Guide
x Value
— All aids for this command
— System
— GPS receiver
x=A Remote oscillator A input
x=B Remote oscillator B input
x=A Span A input
x=B Span B input
x=A E1 A output
x=B E1 B output
x=1 to 8 Additional E1 outputs
(990-72020-02 systems only)
Mixed E1/T1 outputs
(990-72020-06 systems only)
x=1 to 2 ESCIU ports: 1 or 2
(990-72020-04 systems only)
Item Addressed
097-72020-01 Revision K – December 2005