Installation - Illustra IFS03CFOCWST Quick Start Manual

Illustra Flex 3MP Compact Mini Dome Quick Start Guide
Interior button
Note:The connector cable of the Compact Mini Dome camera should be contained in a conduit
suitable for outdoor use
Note:Connectors and field wiring terminals for external Class 2 circuits provided with marking
indicating minimum Class of wiring to be used. Class 2 shall be marked adjacent to the field wiring
terminals.

Installation

In the box
Check everything in the packing box matches to the order form and the packing slip. In addition to
this guide, items below are included in the packing box.
• 2 Plastic Anchors and screws 35mm
• 1 T20 Security Torx Wrench
• 1 Installation template sticker
• 1 printed Quick Start Guide
• 1 printed Regulatory document
• 1 Desiccant bag
Contact your dealer if any item is missing.
Installation tools
The following tools assist with installation:
• a drill
• screwdrivers
• wire cutters
Checking appearance
When first unboxing, check whether if there is any visible damage to the appearance of the unit and
its accessories. The protective materials used for the packaging should be able to protect the unit
from most types of accidents during transportation. Remove the protective part of the unit when
every item is checked in accordance with the list in In the box on page 4.
8200-1456-06 B0
Table 7 Interior button descriptions
Resets to factory default by pressing and holding the button for five seconds.
Reboots the unit.
Description
4