Illustra IFS03CFOCWST Quick Start Manual page 11

Procedure 3 Adjusting the Position
The unit has three axes for positioning, refer to Figure 10 on page 7. While monitoring, adjust the
position as below.
Step Action
1 Pan Adjustment (A) For Wall Mount and Tilted Ceilings:
a Rotate the lens base (maximum 140°) until you are satisfied with the field of view.
2 Horizontal Rotation (B):
a Rotate 3D assembly in the base. Do not turn assembly more than 354° as this
assembly may cause the internal cables to twist and disconnect or break.
3 Tilt Adjustment (C):
a Tilt the lens base (maximum 125° from the frontal mounting surface) until you are sat-
isfied with the field of view.
Limitation of three axis positions of lens centroid:
• Pan range: 140°
CAUTION
• Tilt range: 15° to 125° from frontal mounting surface
• Rotate (z-axis): 354°
7
Illustra Flex 3MP Compact Mini Dome Quick Start Guide
Figure 10 Adjusting the position of the camera
8200-1456-06 B0