Indication Lamps; Warning Lamps - Mitsubishi i-MiEV 2011 Owner's Manual

Hide thumbs Also See for i-MiEV 2011:
Table of Contents

Advertisement

Indication lamps

E00501600012
Turn-signal indication lamps/
Hazard warning indication
lamps
E00501700374
These indication lamps blink on and off
when a turn-signal lamp is operating.
NOTE
l
If the blinking is too fast, the
cause may be a blown lamp bulb
or a faulty turn-signal connection.
When the hazard warning lamp switch is
pressed, all turn-signal lamps will flash
on and off continuously.
High-beam indication lamp
E00501800072
This indication lamp illuminates when
the high-beam is used.
Front fog lamp indication
lamp*
E00501900132
This indication lamp illuminates while
the front fog lamps are on.
Rear fog lamp indication lamp
E00502000084
This indication lamp illuminates while
the rear fog lamp is on.
Position lamp indication lamp
E00508900102
This lamp illuminates with the lamp
switch at "
" or "
" position
Ready indicator
E00530100019
This indicator illuminates when the elec-
tric motor switch is turned to "START"
and driving becomes possible.
Charging indicator
E00530200010
This indicator flashes when the regular
charging cable or quick charging cable
is connected.
After that, the lamp switches to being il-
luminated when charging starts and goes
out when charging is completed.
Instruments and controls

Warning lamps

E00502400017
Brake warning lamp (brake
warning buzzer)
E00502502490
This lamp illuminates when the electric
motor switch is turned to the "ON" posi-
tion, and goes off after a few seconds.
Always make sure that the lamp goes off
before driving.
With the electric motor switch in the
"ON" position, the brake warning lamp
illuminates under the following condi-
tions:
l
When the parking brake lever has
been engaged.
l
When the brake fluid level in the
reservoir falls to a low level.
l
When there is a fault in the brake
vacuum pressure system.
l
When the brake force distribution
function is not operating correctly.
Brake warning buzzer
When the brake vacuum pressure is in-
sufficient, a buzzer will sound to alert
the driver that braking performance may
decrease. If this buzzer should continue
to sound, park your vehicle in a safe
place and we recommend you to have it
checked.
4-09
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents