Mitsubishi i-MiEV 2011 Owner's Manual page 173

Vehicle care and Maintenance
High-mounted stop lamp
1. Remove the mounting screws (A) and re-
move the lamp unit.
2. Turn the socket anticlockwise to remove it.
8
8-34
3. Pull the bulb out of the socket.
E08406000016
4. To install the bulb, perform the removal
steps in reverse.
NOTE
l When installing the lamp unit, make sure not
to bend the washer fluid hose (B).
Licence plate lamps
E08405900018
1. When removing the lamp unit (A), push it to-
wards the left side of the vehicle body.
2. Use a straight blade (or minus) screwdriver
with a cloth over its tip to gently pry up the
tab (B) and remove the lens.