Mitsubishi i-MiEV 2011 Owner's Manual page 58

A- Vehicle seat cushion
B- Vehicle seatback
C- Lower anchorage
D- Connector
If your child restraint system requires the use
of a tether strap, fasten the tether strap in ac-
cordance with steps 3 through 4.
4. Remove the head restraint from the location
in which you wish to install a child restraint.
5. Open the tether anchorage cover (E), and
then latch the tether strap hook (F) of the
child restraint system to the tether anchorage
bracket (G) and tighten the top tether strap
hook so it is securely fastened.
6. Push and pull the child restraint system in all
directions to be sure it is firmly secured.
To remove
Remove the child restraint system in accordance
with the instructions provided by the child restraint
system's manufacturer.
Seat and seat belts
Installing a child restraint system to a
3-point type seat belt (with emergency
locking mechanism)
E00408700646
3-point type seat belt location
The child restraint system can be fitted by using
the 3-point type seat belt at the seating position il-
lustrated below.
Installation:
1. Fasten the seat belt to secure the child re-
straint system.
Make sure you hear a "click" when you in-
sert the latch plate in the buckle.
2. Use the locking clip to completely eliminate
any slackness.
3. Push and pull the child restraint in all direc-
tions to be sure it is secure.
3
3-19