Mitsubishi i-MiEV 2011 Owner's Manual page 168

3. While pulling up the tab (C), pull out the
bulb (D).
4. To install the bulb, perform the removal
steps in reverse.
CAUTION
l Handle the halogen lamp bulb with care.
The gas inside the halogen lamp bulb is
highly pressurized, so dropping, knock-
ing, or scratching a halogen lamp bulb
can cause it to shatter.
l Never hold the halogen lamp bulb with a
bare hand, dirty glove, etc.
The oil from your hand could cause the
bulb to break the next time the head-
lamps are operated.
If the glass surface is dirty, it must be
cleaned with alcohol, paint thinner, etc.,
and refit it after drying it thoroughly.
Headlamps (high-beam)
E08405200011
1. Turn the socket (A) anticlockwise to remove
it.
Vehicle care and Maintenance
2. While holding down the tab (B), pull out the
bulb (C).
3. To install the bulb, perform the removal
steps in reverse.
CAUTION
l Handle halogen lamp bulbs with care.
The gas inside halogen lamp bulbs is high-
ly pressurized, so dropping, knocking, or
scratching a halogen lamp bulb can cause
it to shatter.
l Never hold the halogen lamp bulb with a
bare hand, dirty glove, etc.
The oil from your hand could cause the
bulb to break the next time the head-
lamps are operated.
If the glass surface is dirty, it must be
cleaned with alcohol, paint thinner, etc.,
and refit it after drying it thoroughly.
8
8-29