Mitsubishi i-MiEV 2011 Owner's Manual page 95

Hide thumbs Also See for i-MiEV 2011:
Table of Contents

Advertisement

Starting and driving
1. Place the lever (A) to the same side as the mir-
ror you wish to adjust.
L- Left outside mirror adjustment
R- Right outside mirror adjustment
5
2. Press the switch (B) to the left, right, up or
down to adjust the mirror position.
1- Up
2- Down
3- Right
4- Left
3. Return the lever (A) back to the middle posi-
tion (•).
Retracting and extending the outside
mirrors
The outside mirror can be folded in towards the
side window to prevent damage when parking in
narrow areas.
5-06
CAUTION
l
Do not drive the vehicle with the mirror
folded in.
The lack of rearward visibility normally
provided by the mirror could lead to an
accident.
With the electric motor switch in the "ON" or
"ACC" position, push the mirror retractor switch to
retract the mirrors.
Push it again to extend the mirrors to their original
positions.
After turning the electric motor switch to the
"LOCK" position, it is possible to retract and ex-
tend the mirrors using the mirror retractor switch
for about 30 seconds.
E00601100669
CAUTION
l
It is possible to retract and extend the mir-
rors by hand. After retracting a mirror us-
ing the mirror retractor switch, however,
you should extend it by using the switch
again, not by hand. If you extended the
mirror by hand after retracting it using
the switch, it would not properly lock in
position. As a result, it could move be-
cause of the wind or vibration while you
are driving, taking away your rearward
visibility.
NOTE
l
Be careful not to get your hands trapped
while a mirror is moving.
l
The mirrors can be retracted or extended
with the keyless entry system remote control
switch. Refer to "Keyless entry system" on
page 2-03.
l
If you move a mirror by hand or it moves af-
ter hitting a person or object, you may not be
able to return it to its original position using
the mirror retractor switch. If this happens,
push the mirror retractor switch to place the
mirror in its retracted position and then push
the switch again to return the mirror to its orig-
inal position.
l
When freezing has occurred and mirrors fail
to operate as intended, please refrain from re-
peated pushing of the retractor switch as this
action can result in burn-out of the mirror mo-
tor circuits.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents