Mitsubishi i-MiEV 2011 Owner's Manual page 166

NOTE
l Use the work hole (E) on the deck garnish to
confirm that the tab (C) on the upper part of
the headlamp is firmly fixed in place.
Upper part of headlamp
2. Make sure that the tip (F) of the mounting
bracket is hooked on the body edge (G).
3. Make sure that the pin (H) is inside the hole
on the mounting bracket .
Vehicle care and Maintenance
4. Firmly tighten the headlamp mounting bolts
in the following order: to .
5. After pressing down on the bumper and fend-
er joint from above to fit it in, fix it in place
with the clip.
NOTE
l Secure the bumper clip by first inserting it in-
to the mounting hole and then pressing the
centre (I) of the clip in.
8
8-27