Mitsubishi i-MiEV 2011 Owner's Manual page 57

Seat and seat belts
Installing a child restraint system to
the lower anchorage (ISOFIX child re-
straint mountings) and tether anchor-
age
Lower anchorage location
Your vehicle's rear seat is fitted with lower ancho-
rages for attaching a child restraint system with ISO-
FIX mountings.
3
3-18
Tether anchorage locations
There are 2 child restraint anchorage points located
on the luggage compartment floor. These are for se-
curing a child restraint system tether strap to each
of the 2 rear seating positions in your vehicle.
E00406900703
WARNING
l Child restraint anchorages are designed
to withstand only those loads imposed by
correctly fitted child restraints. Under no
circumstances are they to be used for
adult seat belts, harnesses, or for attach-
ing other items or equipment to the vehicle.
Child restraint system with ISOFIX mountings
The child restraint system is designed only for
seats that incorporate lower anchorages. Retain the
child restraint system using the lower anchorages.
It is not necessary to retain the child restraint sys-
tem using the vehicle's seat belts.
TOP TETHER
A- Child restraint system connectors
To install
1. Remove any foreign material in or around
the connectors and ensure the vehicle seat
belt is in its normal storage position.
2. Open the gap a little between the seat cush-
ion (A) and the seatback (B) with your hand
to locate the lower anchorages (C).
3. Push the child restraint system's connectors
(D) into the lower anchorages (C) in accord-
ance with the instructions provided by the
child restraint system's manufacturer.