Maintenance for Generators and Modules
Maintenance for Generators and Modules
Preparation
Servicing Prerequisites
xxii
The following information applies to all of the generators and modules that can be
used with the TG700 mainframe. Before doing maintenance procedures on any
module, read the following information.
Read and follow these preparation instructions before attempting to perform any
maintenance or service to the instrument.
Ensure the following before beginning any instrument service:
The maintenance or service of this instrument must be performed by qualified
service personnel only.
Read the Service Safety Summary located at the beginning of this manual
before attempting to perform any maintenance or service to the instrument.
This section contains instructions and procedures for maintaining the AG7
Generator module.
The following information can be found in this section:
Preparation (See page xxii.)
Inspection and Cleaning (preventive maintenance) (See page xxiv.)
Repackaging Instructions (See page xxv.)
Removal and Replacement (See page 2-3.)
Troubleshooting (See page 1-24.)
If the instrument does not function properly, troubleshooting and corrective
measures should be taken immediately to prevent additional problems.
NOTE.
Contact your local Tektronix representative for information on where to
return your instrument if it requires repair during the warranty period.
TG700 TV Signal Generator Platform Service Manual