Table of Contents
Advertisement
Using Smart CLI
The Smart CLI commands can be executed from a hyperterminal connection, a password-protected
Telnet connection or at the web interface. When using CLI at the web interface, be aware that you
will not be able to execute those commands that are restricted to the ADMIN mode.
The SC-IP command line interface is composed of commands, zero or more subcommands and zero
or more arguments. The general syntax of a command entered at the command prompt is:
command
Finding Commands and Subcommands
Use the ? character to get a description of commands available, or at any time in the command
line to get context help. The syntax of a help description is:
command
parameter(s)
For example:
•
When you type the ? character at the beginning of a command line, the screen displays all the
commands available along with a one line description of each command:
Demo_unit%> ?
_______________________SpectraComm IP Commands___________________________
clear
configure
connect
default
disable
enable
help
ping
show
_______________________Utility Commands___________________________________
batch
exit
flash
reboot
tftp
tutorial
_______________________Notes______________________________________________
Commands may be abbreviated. Command text expands when space is entered.
Use "?" at any time on the command line to get help. Use CTRL-C to abort
command line. Use Up/Down arrow keys to recall previous command lines.
•
When you type show the screen displays help for only the show command:
Demo_unit%> show?
show
076R200-000
Issue 2
Appendix B:
if any
<subcommand(s)>
Brief description of command or subcommand
description, if any, for the command or subcommand
Reset functions
Configure system parameters
Connect to terminal interface or modem
Default configuration to factory values.
Turn off supervisor/admin commands
Turn on supervisor/admin commands
Description of the command line interface and help system
Send ping to remote device
Show system parameters
Store and/or run commands in batch mode
Exit SpectraComm IP Command Line Interface
Copy flash files/select flash boot file
Halt and perform a reboot
Enable/Disable TFTP Server (supports flash upgrade)
Display tutorials for SCIP
Show system parameters
SpectraComm IP Router Card
Installation and Operation Manual
CLI Reference
<required argument(s)>
if any
B-1
Advertisement
Table of Contents
