Table of Contents
Advertisement
The Web Interface
Traffic Shaping
The Traffic Shaping screen displays a read-only list of Traffic Shaping information for the
associated interfaces. Use the entry fields at the bottom of the screen to configure the interfaces for
Traffic Shaping as required. For more information, refer to Chapter 3:
Smart CLI
or use the CLI online help provided at the Command Line web screen.
Traffic Shaping Configuration Procedure
1. Activate the entry fields for the desired interface by clicking on the list or by selecting it from
the pulldown list. The current settings are displayed in the entry fields.
2. Configure Traffic Shaping for the selected interface by using the remaining pulldown lists.
If needed, use the Cancel button to reset the fields, then enter the desired settings.
3. When the entry fields are correct, use the Apply button to update the list with the new
settings. The ^ symbol appears in the list, designating any interface that has been changed
but not saved. Repeat steps 1-3 for the remaining interface.
4. When all desired changes have been made, click the Save button to save the Traffic Shaping
configuration data to the unit.
076R200-000
Issue 2
SpectraComm IP Router Card
Installation and Operation Manual
SC-IP Web Screens
Configuring SC-IP with
4-13
Advertisement
Table of Contents
