Starting A Web Session - General DataComm spectracomm ip Installation & Operation Manual

Router card
Table of Contents

Advertisement

The Web Interface

Starting A Web Session

To start a web management session, type the IP address of a SC-IP unit or type the host name at any
browser. The following authorization screen appears:
User Name and Password
SC-IP web pages are protected by pre-configured user names, passwords and the associated access
privileges as assigned by an Administrator. A valid password can be up to 20 alphanumeric
characters. If three consecutive invalid passwords are entered, a temporary lock-out will occur.
Access Modes
Access modes configured by the Administrator determines whether a user name has Read-only or
Read-Write privileges to the SC-IP web screens.
User Mode
(Read Only access)
Supervisor Mode
(Read/Write access permits data entry and configuration changes.)
Admin Mode - Access Denied
(Admin commands must be entered via Telnet or Craft interface.)
Note
Access will be denied to any user or supervisor if there are already eight web sessions in progress.
4-2
Introduction to SC-IP Web Management
SpectraComm IP Router Card
Installation and Operation Manual
076R200-000
Issue 2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-ip

Table of Contents