New Admin Password - VERITAS NetBackup 5230 Configuration Manual

Performing the initial configuration on a NetBackup 52xx appliance from the NetBackup Appliance Web Console

New admin password

Confirm new password
After you have entered all of the necessary information, click Next.
9
On the Date & Time page, enter the appropriate date and time for this
appliance.
You can enter the information manually or use a Network Time Protocol (NTP)
server to synchronize the appliance date and time over the network.
Time zone
Specify date &
time
NTP
After you have entered all of the necessary information, click Next.
10
On the Alerting and Call Home page, enter the information for the appliance
to send alerts or to upload status reports by email to a Veritas Call Home server.
Enter the new password.
Valid passwords must include the following:
Eight or more characters
■
At least one lowercase letter
■
At least one number (0-9)
■
Uppercase letters and special characters can be
included, but they are not required.
The following describes password restrictions:
Dictionary words are considered weak passwords
■
and are not accepted.
The last seven passwords cannot be reused, and
■
the new password cannot be similar to previous
passwords.
Re-enter the new password for confirmation.
To assign a time zone to the appliance, click on the Time zone
drop-down box and select the appropriate region, country, and
time zone.
To enter the date and the time manually, select this option and
enter the following information:
In the first field, enter the date by using the mm/dd/yyyy
■
format. Or, click on the calendar icon and select the appropriate
month, day, and year.
In the second field, enter the time by using the hh:mm:ss
■
format. Entries must be in the 24 hour format (00:00:00 -
23:59:59).
To synchronize the appliance with a Network Time Protocol (NTP)
server, select this option and enter the NTP Server IP address.
Initial configuration procedures 41