VERITAS NetBackup 5230 Configuration Manual page 39

Performing the initial configuration on a NetBackup 52xx appliance from the NetBackup Appliance Web Console
For DNS systems: Enter the following Domain Name System information:
■
■
■
After you have entered all of the necessary information, click Next.
Domain Name Suffix
Enter the suffix name of the DNS server.
DNS IP Address(es)
Enter the IP address of a DNS server, then click the + icon to
add the address. Repeat as necessary for the number of
addresses that you want to add.
The address can be either IPv4 or IPv6. For IPv6 addresses,
only global-scope or unique-local addresses are allowed.
See "About IPv4-IPv6-based network support"
To remove an address, select it from the list that appears below
the data entry field and click the x icon.
Search Domain(s)
Enter a search domain name, then click the + icon to add the
name. Repeat as necessary for the number of search domains
that you want to add.
To remove a search domain, select it from the list that appears
below the data entry field and click the x icon.
Initial configuration procedures
on page 12.
39