About the initial configuration pages in the
NetBackup Appliance Web Console
About the initial configuration pages in the NetBackup Appliance Web Console
The
■
Main_Menu > Network > Hosts
to be assigned to the same host name having one network interface card (NIC).
However, only one IPv4 address can be assigned to a specific host name having
one NIC using this command.
You can add an IPv6 address of a network interface without specifying a gateway
■
address.
For more details, see the NetBackup Appliance Command Reference Guide.
NetBackup appliances let you perform the initial configuration from the NetBackup
Appliance Web Console with a series of pages where you enter the appropriate
information.
Welcome to Appliance Setup page
Figure 1-1
shows the page that first appears when you log in to an unconfigured
appliance. This page provides a summary of the initial configuration tasks.
Welcome to Appliance Setup page
Figure 1-1
Preparing for initial configuration
command supports multiple IPv6 addresses
14