Smtp Server Address [Program], [0], [3], [0], [4], [0], [5], [0], [8] - Toshiba e-studio16 Administrator's Manual

SMTP Server Address
This sets the IP address of the SMTP server which used for an Outgoing E-mail server.
Note
When "SMTP" is selected in "Receive Mode", the machine also retrieving E-mails from the SMTP
server assigned here using the SMTP transmission. In this case, this machine works as one of the
mail servers.
1
Enter the IP address of the SMTP server, then press
the key.
• SMTP SERVER ADDRESS
Enter the IP address of the SMTP server.
2
Press the key.
• The display returns to the NETWORK menu.
• If you want to change another E-MAIL setting, change the
setting before pressing the
3
Press to select "01.COMPLETE". Save the
E-mail settings and start initializing.
• After 2 seconds, the Operation Completed message is
displayed and returns to the INITIAL SETUP menu. It may
take few minutes to finish initializing the Network Interface
Card.
• If you want cancel the E-MAIL setting, press the
before selecting "01.COMPLETE".
[PROGRAM], [0], [3], [0], [4], [0], [5], [0], [8]
key.
key
SMTP SERVER ADDRESS
000.000.000.000
NETWORK
01.COMPLETE
02.TCP/IP
03.NETWARE
NETWORK
Initializing
NETWORK
Operation Completed
INITIAL SETUP
01.DATE & TIME
02.LANGUAGE
03.TERMINAL ID
1
2
3
4
5
6
7
8
9
10
11
12
2-17