Default Gateway [Program], [0], [3], [0], [4], [0], [2], [0], [4] - Toshiba e-studio16 Administrator's Manual

Default Gateway
This setting is used to assign the Default Gateway address when the machine is used in the network
through a router.
1 Enter the Default Gateway address, then press the
key.
• DEFAULT GATEWAY
Enter the address of a router on the network if the machine
is used in the network through a router.
2 Press the key.
• The display returns to the NETWORK menu.
• If you want to change another TCP/IP network setting,
change the setting before pressing the
3
Press to select "01.COMPLETE". Save the
network settings and start initializing.
• After 2 seconds, the Operation Completed message is
displayed and returns to the INITIAL SETUP menu. It may
take few minutes to finish initializing the Network Interface
Card.
• If you want cancel the TCP/IP setting, press the
before selecting "01.COMPLETE".
[PROGRAM], [0], [3], [0], [4], [0], [2], [0], [4]
key.
key
NETWORK
01.COMPLETE
02.TCP/IP
03.NETWARE
NETWORK
Initializing
NETWORK
Operation Completed
INITIAL SETUP
01.DATE & TIME
02.LANGUAGE
03.TERMINAL ID
1
2
3
4
5
6
7
8
9
10
11
12
2-7