Receive Mode [Program], [0], [3], [0], [4], [0], [5], [0], [3] - Toshiba e-studio16 Administrator's Manual

2. E-MAIL ACCOUNT SETUP (Cont.)
Receive Mode
This sets the type of protocols used for receiving E-mail. The available functions vary according to that
1
this is set to "POP" or "SMTP".
Note
To perform the Offramp Gateway transmission, the Receive Mode must set to "SMTP".
2
1
Enter the E-mail address, then press the
• POP
3
Selected to use the POP for receiving E-mails from the mail
server.
• SMTP
Selected to use the SMTP for receiving E-mails from the
4
mail server.
2 Press the
• The display returns to the NETWORK menu.
5
• If you want to change another E-MAIL setting, change the
setting before pressing the
6
3
Press
E-mail settings and start initializing.
• After 2 seconds, the Operation Completed message is
7 displayed and returns to the INITIAL SETUP menu. It may
take few minutes to finish initializing the Network Interface
Card.
• If you want cancel the E-MAIL setting, press the
before selecting "01.COMPLETE".
8
9
10
11
12
2-12
FUNCTION SETTINGS
[PROGRAM], [0], [3], [0], [4], [0], [5], [0], [3]
key.
key.
to select "01.COMPLETE". Save the
RECEIVE MODE
key.
1.POP
2.SMTP
NETWORK
01.COMPLETE
02.TCP/IP
03.NETWARE
NETWORK
Initializing
NETWORK
key
Operation Completed
INITIAL SETUP
01.DATE & TIME
02.LANGUAGE
03.TERMINAL ID