Error Codes Printed On Reports; Transmit Code - Toshiba e-studio16 Administrator's Manual

Digital plain paper copier
Hide thumbs Also See for e-studio16:
Table of Contents

Advertisement

2. ERROR CODES PRINTED ON REPORTS

Transmit Code

Error Code
An error occurs during converting the image
60
data.
An error occurs during editing the text data.
61
Cannot access to the Network Interface
62
Card.
Sequence problem occurs in IEEE1284
63
interface.
An error or timeout error occurs during
71
accessing to the SMTP server.
The Host Name is incorrect.
72
The E-mail Address of this machine has not
73
been set.
The SMTP Server Address has not been set.
74
The IP Address of this machine has not been
75
set.
The scanned data size of a page exceeds
76
the limitation.
The mail server cannot find the destination
77
of E-mail address that you send.
The E-mail Address of this machine is
78
incorrect.
An error occurs in the connection of SMTP
79
server because of line traffic.
The unsuccessful DSN is received from the
7A
mail server.
The recipient cannot successfully receive
7B
your E-mail and unsuccessful MDN is
received.
Cause
Solution
The Internet Fax unit may be required to be
replaced.
The Internet Fax unit may be required to be
replaced.
The Network Interface Card or Internet Fax
unit may be required to be replaced.
Check the connector cable is correctly
connected. If the error repeatedly occurs, the
Internet Fax unit may be required to be
replaced.
Check the SMTP server address is correctly
set. Check your mail server is supported by
the Internet Fax or correctly set up for the
Internet Fax.
Set the Host Name correctly.
Set the E-mail Address of this machine.
Set the SMTP Server Address.
Set the IP Address of this machine.
Change the Message Size Limit and try again.
Check the E-mail address that you send and
try again.
Set the E-mail Address of this machine
correctly.
Try again when the line traffic of your network
becomes less.
Check the E-mail address that you send and
try again.
The capability of E-mail that you send is not
supported by the recipient MUA. Check the
capability setting and try again.
1
2
3
4
5
6
7
8
9
10
11
12
4-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio20E-studio25

Table of Contents