Qmail's Configuration Files - Toshiba e-studio16 Administrator's Manual

Qmail's Configuration Files

For using Qmail, there are several files for configuration.
Control File
me
defaultdomain
defaulthost
locals
plusdomain
rcphosts
The descriptions of these files are as following:
me
Write the FQDN of the mail server to this file. This file is used as a default value when there are not
other files, defaultdomain, locals, plusdomain, and rcphosts.
Example:
mail.toshiba.com
defaultdomain
Write a domain name that is added after the host part when the domain name of an E-mail address is
without a dot.
Example:
toshiba.com
(In this case, an E-mail address "ifax@ifax" becomes "ifax@ifax.toshiba.com".)
defaulthost
Write a domain name that is added after the name when "@domainname" is abridged from an E-mail
address.
Example:
toshiba.com
(In this case, an E-mail address "ifax" becames "ifax@toshiba.com".)
locals
Write domain names which the email server transfers as a local transmission.
mail contains the domain name written in this file, the E-mail is controlled by qmail-local.
Example:
localhost
localhost.ifax.toshiba.com
mail.toshiba.com
ifax.toshiba.com
plusdomain
Write a domain name that is added after "+" when the domain name of an E-mail address is finished
with "+". (For example, "ifax@ifax+")
Default Command using this file
required all Qmail's programs
me qmail-inject
me qmail-inject
me qmail-send
me qmail-inject
(none) qmail-smtpd
When a received E-
3-27
1
2
3
4
5
6
7
8
9
10
11
12