Pop Server Address [Program], [0], [3], [0], [4], [0], [5], [0], [4]; Pop Server Address - Toshiba e-studio16 Administrator's Manual

POP Server Address

This sets the IP address of the POP server. This must be set when "POP" is selected in "Receive Mode."
1
Enter the IP address of the POP server, then press
the key.
• POP SERVER ADDRESS
Enter the IP address of the POP server.
2 Press the key.
• The display returns to the NETWORK menu.
• If you want to change another E-MAIL setting, change the
setting before pressing the
3 Press to select "01.COMPLETE". Save the
E-mail settings and start initializing.
• After 2 seconds, the Operation Completed message is
displayed and returns to the INITIAL SETUP menu. It may
take few minutes to finish initializing the Network Interface
Card.
• If you want cancel the E-MAIL setting, press the
before selecting "01.COMPLETE".
[PROGRAM], [0], [3], [0], [4], [0], [5], [0], [4]
key.
key
POP SERVER ADDRESS
000.000.000.000
NETWORK
01.COMPLETE
02.TCP/IP
03.NETWARE
NETWORK
Initializing
NETWORK
Operation Completed
INITIAL SETUP
01.DATE & TIME
02.LANGUAGE
03.TERMINAL ID
1
2
3
4
5
6
7
8
9
10
11
12
2-13