Selection Oflubricating Grease - Dodge Dakota 2006 Owner's Manual

332 MAINTAINING YOUR VEHICLE
axle fluid levelshould be 1/4
hole for 8 1/4axles and should be 5/8 (16mm)below
filler plug for 9 1/4 axles.
FrontAxle
Fr ontAxle fluid levelshould be atthe bottom ofthe fill
plug.

Selection ofLubricating Grease

The National Lubricating Gr ease Institute (NLGI) has
developed a symbol (Certification Mark) to aid the
vehicle ownerin the pr operselection ofgr ease forchassis
components.This symbol,an example shown below ,is
located on the gr ease container and identifies the appli-
cation and quality ofthe gr ease.
(6.35mm)below fillerplug
quality levelavailable and when combined asshown can
be used for chassis lubrication.Use only those gr ease
thathave the NLGIsymbolon the container along with
the pr oper quality levelfor your application.
Ther e ar e two gr oups
identified,those for wheel
bearings (Letter "G") and
those for chassis (Letter
"L") lubrication. Perfor -
mance categories within
these gr oupsr esultin dual
letter designations
each gr oup.The letterdes-
ignations shown in the ex-
ample ar e the highest
for