Configuring A Port To Operate In Automatic Voice Vlan Assignment Mode; Configuration Restrictions And Guidelines; Configuration Procedure - HPE FlexFabric 5940 Series Configuration Manual

Configuring a port to operate in automatic voice
VLAN assignment mode

Configuration restrictions and guidelines

When you configure a port to operate in automatic voice VLAN assignment mode, follow these
restrictions and guidelines:
•
Do not configure a VLAN as both a voice VLAN and a protocol-based VLAN.
A voice VLAN in automatic mode on a hybrid port processes only tagged incoming voice
traffic.
A protocol-based VLAN on a hybrid port processes only untagged incoming packets. For
more information about protocol-based VLANs, see
•
As a best practice, do not use this mode with MSTP. In MSTP mode, if a port is blocked in the
MSTI of the target voice VLAN, the port drops the received packets instead of delivering them to
the CPU. As a result, the port will not be dynamically assigned to the voice VLAN.
•
As a best practice, do not use this mode with PVST. In PVST mode, if the target voice VLAN is
not permitted on a port, the port is placed in blocked state. The port drops the received packets
instead of delivering them to the CPU. As a result, the port will not be dynamically assigned to
the voice VLAN.
•
As a best practice, do not configure both dynamic MAC-based VLAN assignment and automatic
voice VLAN assignment mode on a port. They can have a negative impact on each other.

Configuration procedure

To configure a port to operate in automatic voice VLAN assignment mode:
Step
Enter system view.
1.
(Optional.) Set the voice
2.
VLAN aging timer.
(Optional.) Enable the
3.
voice VLAN security
mode.
(Optional.) Add an OUI
4.
address for voice packet
identification.
Enter interface view.
5.
Command
system-view
voice-vlan aging minutes
voice-vlan security enable
voice-vlan mac-address oui mask
oui-mask [ description text ]
•
Enter Layer 2 Ethernet interface
view:
interface interface-type
interface-number
•
Enter Layer 2 aggregate interface
view:
interface bridge-aggregation
interface-number
198
"Configuring protocol-based
Remarks
N/A
By default, the aging timer of a
voice VLAN is 1440 minutes.
The voice VLAN aging timer
takes effect only on ports in
automatic voice VLAN
assignment mode.
By default, the voice VLAN
security mode is enabled.
By default, system default
OUI addresses exist. For
more information, see
14.
N/A
VLANs."
Table