HPE FlexFabric 5940 Series Configuration Manual page 179

# Configure Ten-GigabitEthernet 1/0/1 as a hybrid port, and assign it to VLANs 100 and 200 as
an untagged VLAN member.
[Device] interface ten-gigabitethernet 1/0/1
[Device-Ten-GigabitEthernet1/0/1] port link-type hybrid
[Device-Ten-GigabitEthernet1/0/1] port hybrid vlan 100 200 untagged
# Associate Ten-GigabitEthernet 1/0/1 with the IPv4 and ARP protocol templates of VLAN 100
and the IPv6 protocol template of VLAN 200.
[Device-Ten-GigabitEthernet1/0/1] port hybrid protocol-vlan vlan 100 1 to 2
[Device-Ten-GigabitEthernet1/0/1] port hybrid protocol-vlan vlan 200 1
[Device-Ten-GigabitEthernet1/0/1] quit
# Configure Ten-GigabitEthernet 1/0/2 as a hybrid port, and assign it to VLANs 100 and 200 as
an untagged VLAN member.
[Device] interface ten-gigabitethernet 1/0/2
[Device-Ten-GigabitEthernet1/0/2] port link-type hybrid
[Device-Ten-GigabitEthernet1/0/2] port hybrid vlan 100 200 untagged
# Associate Ten-GigabitEthernet 1/0/2 with the IPv4 and ARP protocol templates of VLAN 100
and the IPv6 protocol template of VLAN 200.
[Device-Ten-GigabitEthernet1/0/2] port hybrid protocol-vlan vlan 100 1 to 2
[Device-Ten-GigabitEthernet1/0/2] port hybrid protocol-vlan vlan 200 1
[Device-Ten-GigabitEthernet1/0/2] quit
Configure hosts and servers:
2.
a. Configure IPv4 Host A, IPv4 Host B, and IPv4 server to be on the same network segment
(192.168.100.0/24, for example). (Details not shown.)
b. Configure IPv6 Host A, IPv6 Host B, and IPv6 server to be on the same network segment
(2001::1/64, for example). (Details not shown.)
Verifying the configuration
Verify the following:
1.
The hosts and the server in VLAN 100 can successfully ping one another. (Details not
shown.)
The hosts and the server in VLAN 200 can successfully ping one another. (Details not
shown.)
The hosts or the server in VLAN 100 cannot ping the hosts or server in VLAN 200. (Details
not shown.)
Verify the protocol-based VLAN configuration:
2.
# Display protocol-based VLANs on Device.
[Device] display protocol-vlan vlan all
VLAN ID: 100
Protocol index
1
2
VLAN ID: 200
Protocol index
1
# Display protocol-based VLANs on the ports of Device.
[Device] display protocol-vlan interface all
Interface: Ten-GigabitEthernet1/0/1
VLAN ID
Protocol type
IPv4
Ethernet II Etype 0x0806
Protocol type
IPv6
Protocol index Protocol type
169
Status