Step
Configure the link type of
6.
the port.
Configure the port to
7.
operate in automatic voice
VLAN assignment mode.
Enable the voice VLAN
8.
feature on the port.
Configuring a port to operate in manual voice
VLAN assignment mode
Configuration restrictions and guidelines
When you configure a port to operate in manual voice VLAN assignment mode, follow these
restrictions and guidelines:
•
You can configure different voice VLANs for different ports on the same device. Make sure the
following requirements are met:
One port can be configured with only one voice VLAN.
Voice VLANs must be existing static VLANs.
•
Do not enable voice VLAN on the member ports of a link aggregation group. For more
information about link aggregation, see
•
To make a voice VLAN take effect on a port operating in manual mode, you must manually
assign the port to the voice VLAN.
Configuration procedure
To configure a port to operate in manual voice VLAN assignment mode:
Step
Enter system view.
1.
(Optional.) Enable the
2.
voice VLAN security
mode.
(Optional.) Add an OUI
3.
address for voice packet
identification.
Enter interface view.
4.
Command
•
port link-type trunk
•
port link-type hybrid
voice-vlan mode auto
voice-vlan vlan-id enable
"Configuring Ethernet link
Command
system-view
voice-vlan security enable
voice-vlan mac-address oui mask
oui-mask [ description text ]
•
Enter Layer 2 Ethernet interface
view:
interface interface-type
interface-number
•
Enter Layer 2 aggregate interface
view:
interface bridge-aggregation
interface-number
199
Remarks
N/A
By default, the automatic
voice VLAN assignment mode
is enabled.
By default, the voice VLAN
feature is disabled.
Before you execute this
command, make sure the
specified VLAN already
exists.
aggregation."
Remarks
N/A
By default, the voice VLAN
security mode is enabled.
By default, system default OUI
addresses exist. For more
information, see
Table
14.
N/A