Displaying And Maintaining Qinq - HPE FlexFabric 5940 Series Configuration Manual

Step
Enter system view.
1.
Create a traffic class and
2.
enter its view.
Configure CVLAN match
3.
criteria.
Return to system view.
4.
Create a traffic behavior
5.
and enter its view.
Configure a priority
6.
marking action for SVLAN
tags.
Return to system view.
7.
Create a QoS policy and
8.
enter its view.
Specify the traffic behavior
9.
for the traffic class in the
QoS policy.
10. Return to system view.
11. Enter Layer 2 Ethernet
interface view.
12. Configure the port to trust
the 802.1p priority in
incoming frames.
13. Enable QinQ.
14. Apply the QoS policy to
the inbound direction of
the port.
For more information about QoS policies, see ACL and QoS Configuration Guide.

Displaying and maintaining QinQ

Execute display commands in any view.
Command
system-view
traffic classifier classifier-name [ operator
{ and | or } ]
•
Match CVLAN IDs:
if-match customer-vlan-id vlan-id-list
•
Match 802.1p priority:
if-match customer-dot1p
dot1p-value&<1-8>
quit
traffic behavior behavior-name
•
Replace the priority in the SVLAN tags of
matching frames with the configured
priority:
remark dot1p dot1p-value
•
Copy the 802.1p priority in the CVLAN
tag to the SVLAN tag:
remark dot1p customer-dot1p-trust
quit
qos policy policy-name
classifier classifier-name behavior
behavior-name
quit
interface interface-type interface-number
qos trust dot1p
qinq enable
qos apply policy policy-name inbound
228
Remarks
N/A
By default, no traffic
classes exist.
N/A
N/A
By default, no traffic
behaviors exist.
N/A
N/A
By default, no QoS
policies exist.
N/A
N/A
N/A
By default, a port does
not trust the 802.1p
priority in frames.
This step is required if
the remark dot1p
command is configured.
It is optional if the
remark dot1p
customer-dot1p-trust
command is configured.
N/A
N/A