Wifi Setting - XYZ Printing ds Vinci Color Quick Manual

WiFi setting

Before setting the WiFi, please insert
the WiFi dongle into USB port on the
top of printer.
1. Tap ADD and the printer will
start to search for available
access points.
Use the XYZmaker to verify if the WiFi connection is established successfully
Use a USB cable to connect the printer to the computer and run the XYZmaker.
●
Check if the WiFi function is activated on the computer and connect to the access point.
●
1. Run the XYZmaker. Click on File > Print > da Vinci
Printer.
3. When the software displays "READY", the
connection is established successfully.
Now, you can click on "DASHBOARD" to
monitor the printer or "PRINT" to print a
file.
2. Tap the access point to be
used.
DASHBOARD: Monitor print head
temperature, filament used and filament
loading / unloading.
3. Enter the password for the
access point.
2. Select the printer to be used.
PRINT: Set printing parameters and quali-
ty. If only a file conversion is needed, tap
"PREPARE".
4. Confirm the connection is
completed.
P7