Configuring The Device - Dräger X-am 1100 Technical Handbook

Configuring the Device
Configuring the Device
To individually configure a device with standard configuration, the device must be connected
with a PC.
Calibration cradle (order no. 83 18 752)
with inserted
USB DIRA with USB cable (order no. 83 17 409)
E-Cal module Dräger X-am 125
(order no. 83 18 754)
The installed PC software "CC Vision" is used for configuration.
Observe the documentation and online help of the software.
— A version of Dräger CC Vision which can be used for X-am 1100/1700/2000 is supplied
with the device on CD.
— The full version of Dräger CC Vision (order no. 64 08 515) can also be used for registering
the devices and documenting calibration/adjustments.
20
IR
USB DIRA with USB cable
(order no. 83 17 409)
USB 1.1 / COM
Dräger
USB 1.1
CC-Vision
Dräger
USB 1.1
CC-Vision
Dräger
CC-Vision