To check the fluid level:
1. Turn off the ignition.
2. Wipe the cap and the top of
the reservoir clean.
3. Remove the cap.
4. Check the fluid level in the
reservoir.
The level should be between
the MIN and MAX marks.
5. If the fluid is below the MIN
mark, you should add fluid.
Add only enough fluid to bring
the fluid up to the proper level.
See the "Recommended Fluids
and Lubricants" chart later in
this section to determine what
kind of fluid to use.
Section 4
CAUTION
When adding fluid, be careful
not to overfill.
If there is too much fluid, it can
spill on the engine. The fluid
will burn if the engine is hot
enough. You or others could be
burned, and your vehicle could
be damaged.
6. Reinstall the cap.
237 . . .